Omron K6CM User Manual page 126

5 Installation and Wiring
 How to install the K6CM device
To mount the K6CM device to a DIN Track, hook the device onto the DIN Track and press the device
in the direction of the arrow until you hear it lock into place.
(1)
 How to remove the K6CM device
Pull down on the bottom hook with a flat-blade screwdriver and lift up on the product.
Leave at least 30 mm of space between the K6CM device and other devices to allow easy installa-
tion and removal.
Screw Mounting
(1) Pull out 2 hooks in the K6CM device back outside until sound will be.
(2) Insert M3 screw in a hole of a hook and fix.
(2)
(2)
Note 1. Pull out the hooks to mount the K6CM device with screws.
2. Recommended tightening torque is 0.5 to 0.6 N·m.
3. Group mounting is not possible in the vertical direction.
5 - 6
(2)
30 mm or more
Mounting Hole Dimensions
(1)
Two, M3 holes or
Two, 3 dia.
(1)
K6CM Motor Condition Monitoring Device User's Manual (N219)
108 mm