Omron K6CM User Manual page 294

Appendices
(1)-2 Editing tag set
To enter tags, there are tabs for Input (Consume) and Output (Produce), but set only the
Input (Consume) tab when connecting the K6CM series.
For editing tag set, click [New (N) ...] in the following Edit Tag Set Dialog Box.
The Edit Tag Set Dialog Box is displayed.
Enter the tag set name, select from the candidate tag list the tag to be a member, and add it
by clicking the (add tag)
After adding a member, you can register tag set by clicking [Register (R)].
In this example, we set "t_K6CM_Monitoring_Data" as the tag set name.
Additional Information
If you add a tag without specifying a tag set name and click [Register (R)], the tag name at the
top of the tag list is automatically entered as the tag set name.
Continue to edit tag sets. Click [Close (C)] to end tag set editing .and return to the Edit Tag
Set Dialog Box.
A - 34
Button at the center or by double-clicking it.
K6CM Motor Condition Monitoring Device User's Manual (N219)