Omron K6CM User Manual page 7

Safety Precautions
CAUTION
There is a risk of minor electrical shock, fire, or device failure. Do not disassemble, modify, repair, or
touch the inside of the product.
If the product fails, monitoring and alarm outputs may fail to operate. This may result in physical
damage to the facilities, equipment, or other devices that are connected to it. To reduce this risk,
inspect the product regularly. To make the product fail-safe, take alternative safety measures, such
as the installation of monitoring devices on a separate circuit.
Incorrect wiring the input and output may occasionally result in fire and may occasionally occur
resulting in property damage to connected equipment and machinery. Wire the input and output ter-
minals correctly before power is supplied.
If installation of wiring material is shallow, material damage due to ignition may occur in rare cases.
When wiring, be sure to insert the wiring material all the way in.
The following are for K6CM-CI2 and K6CM-IS.
Electric shock may occasionally occur. Follow the instructions below to use this product.
Electric shock may occasionally occur.
Always turn OFF the power supply before connecting the special CT or special ZCT (IRT).
Electric shock may occasionally occur. As for the primary wire clamped with the special CT, be sure
to use the insulated wires at temperatures below 65°C that have rated minimum 600 V and at least
basic insulation. When clamping with conductive materials like busbar etc., use the special CT after
ensuring equal to or more than basic insulation e.g. covering with insulating objects.
Electric shock may occasionally occur. When wiring voltage input wires to the special ZCT (IRT), be
sure to wire after checking that the system power supply is in non-energized state.
Electric shock may occasionally occur. As for the wires for clamping with the special ZCT (IRT), be
sure to use the insulated wires that have rated minimum 600 V and at least basic insulation.
Keep the secondary terminal cover of the special CT and ZCT (IRT) securely closed.
Touching any of electrode may result in electric shock.
5
K6CM Motor Condition Monitoring Device User's Manual (N219)