Omron K6CM User Manual page 221

PC (Sysmac Studio installed)
PLC and SD Memory Card (operation confirmed in NJ/NX-series)
Sample program project file (***. Smc 2)
 Network Configuration Example
Each setting is required to prevent the IP address duplication.
PLC
IP: 192.168.250.1
PC
IP: 192.168.250.2
File Specifications of Output CSV
The specifications of the CSV file output to the SD Memory Card of the PLC are shown below.
At the beginning of the CSV file, there is a K6CM device profile data, and collection time stamps and
collected data are output following it.
Collection
time
stamps
 K6CM Device Profile Data
IP Prod Mes Main
addr uct cpu cpu
ess nam ver- ver-
e sion sion
*1. Specific to the K6CM type
K6CM-CI2Mx Current moving average times
K6CM-VBMx Temperature unit
K6CM-ISMx Circuit topology
K6CM Motor Condition Monitoring Device User's Manual (N219)
8 Monitoring and Setting Using the EtherNet/IP Devices
SW hub
K6CM
IP: 192.168.250.101 IP: 192.168.250.102
K6CM device profile data
Collection data
for 1st K6CM
Common to K6CM all models
Eip Soft- Max./ Dis- Trig-
cpu ware min. play ger
ver- reset reset value mod
sion type e
SW hub
K6CM K6CM
IP: 192.168.250.103
Trig- Trig- Mon- Alar
ger ger itor- m
type level ing latch
time
Degradation level 1 moving
average times
Using inverter
K6CM devices
(Any number of Units)
Collection data
for 2nd K6CM
Use Mov- Tran- Mon-
Run- ing sis- itor-
ning aver- tor ing
Time age out- delay
times put time
meth
od
Degradation level 2 moving
average times
Inverter special measurement
8
Spe-
cific
to
the
K6CM
type
*1
8 - 31