Omron K6CM User Manual page 304

Appendices
Right-click anywhere in the [Target Device] List in the Toolbox on the right of the Ether-
Net/IP Connection Setting Tab Page and select [Display EDS Library] from the menu.
Click the [Install] Button at the bottom left, select the following EDS file, click [Open] and
install it.
Model name of the K6CM
K6CM-CI2M
K6CM-VBM
K6CM-ISM
When installation is completed, the category "Motor Condition Monitoring Device" and the
registered K6CM devices are displayed under the tree of the OMRON Corporation in the
EDS Library Dialog Box.
(3)-2 Adding K6CM Devices to the Network
Click the
nection Setting Tab Page.
As in the example below, enter the node address (i.e. IP address) and select the model and
revision from the pull down list.
A - 44
EDS file name
K6CM_CI2M_EIP_R3.eds
K6CM_VBM_EIP_R3.eds
K6CM_ISM_EIP_R3.eds
(Add Target Device) Button in the [Toolbox] on the right of the EtherNet/IP Con-
K6CM Motor Condition Monitoring Device User's Manual (N219)