Omron K6CM User Manual page 302

Appendices
(2)-2 Registering Network Variables (Input)
In the global variable table, press the [Insert] key or right-click and select [Create New (N)],
and enter a variable name. Next, change [Data Type] to the structure type name created in
"(1) Registering Data Type", and change the Network Publish attribute to [Input] from the
pull down list. In this example, the name of the network variable (input) is set to
"K6CM_CIM_Monitor_Data" and the data type is set to "t_K6CM_CIM" created in "(1) Reg-
istering Data Type".
Associate the network variables created here with the tags used in the EtherNet/IP connection
settings described below.
Additional Information
To process the input data as an array variable instead of a structure variable, create a 44-byte
network variable with an array of UINT as [Data Type] in the following example.
A - 42
K6CM Motor Condition Monitoring Device User's Manual (N219)