Omron K6CM User Manual page 95

Select the media type to use.
When selecting "USB flash drive", be sure to prepare an empty recording medium (USB
memory of 8 GB or more, HDD or DVD) without data.
At this point, connect the USB memory to your computer and select "Next" on the installa-
tion screen. Confirm that the USB memory is normally recognized by the computer and dis-
played as a removable drive as below and proceed with creating OS media.
(3) .NET Framework 3.5 Offline installation
Make the software tool recognize the created OS media on the PC you want to install (If
you are using a USB memory or HDD, connect it to a PC, mount it on a PC if it is a DVD).
When the OS media is recognized correctly, the following popup will be displayed. In this
example, you can see that the USB memory as the OS media has been assigned to D drive
(D :).
As we will use the drive information we have confirmed in the later operation, be sure to
check which drive the OS media is assigned to.
Note It is possible to check the media with other methods. Click the Explorer icon located at the bot-
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Motor condition monitoring Tool
tom of the desktop screen.(If there is no icon, hold down the Windows key and press the E key
to start the explorer screen)
4
4 - 13