Functions And Specifications Of The Software Tool - Omron K6CM User Manual

Present value (PV) Display and Automatic Logging and History Dis-
play
Present value (PV) display and automatic logging of the following data of the K6CM device are possi-
ble.
* The project is saved along with the log file.
Target data
• Measurement
value
• Alarm result
Measurement
value, alarm result
Read at specified
4-1-2

Functions and Specifications of the Software Tool

Item
Project
Logging
1 Number that can
be registered in
the project
Graph display
Files to create
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Motor condition monitoring Tool
Present value (PV) display
Display present value (PV) at
specified cycle
Software tool
Present
value (PV)
Automatic
Logging
At the time the project saved
CSV files (referred to as
"log file")
* The software tool obtains the clock information from the PC.
Therefore, do not change the time setting of the PC during
logging and between the logging interruption and the logging restart.
Motor condition monitoring equipment
K6CM device
Number of files that can be created
Supported format
Monitoring cycle
Number of motors
Number of devices per motor
Device type per motor
Types of graphs
Display period *2
Automatic logging / history display
• Automatic logging at the same designated cycle as the left, history
display possible
• At the end of project Save to CSV file called "log file" (For details,
refer to "Log file" of Details of the file to be created on page 4-4.)
History
display
No limit
CSV data format
5 seconds to 366 days*1
10
3
Only one type is possible.
The same device type cannot be registered in the same
motor name.
Polygonal line
1 hour, 1 day, 1 month, 1 year
The following is created in the folder of the project file name.
• Project file (binary format)
• Parameter file (binary format)
• Log file (CSV format)
For details, refer to Details of the file to be created on the
next page.
Specifications
4
4 - 3