7
Click the [Next] Button.
The following [Connecting to device] wizard screen will be displayed.
Version Information
With software tool version 1.2.0.0 or later, the column for displaying the IP addresses of your
PC and registered devices are displayed.
8
Click the [Connection] Button.
"Connecting" will be displayed on the line between the computer and the device on the following
[Connecting to device] wizard screen.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Motor condition monitoring Tool
The IP address selected in the [Port Properties] Dialog Box is
displayed on the screen displayed by selecting [Device setting]
on the startup screen.
If IP address selection is incomplete (i.e., Network port parame-
ter is "Do not use"), "0.0.0.0" is displayed. If "0.0.0.0" is
displayed, you can connect to the device if you set the connec-
tion method to "Automatic Connection" in step 5, but if you set
"Fixed IP connection" you cannot connect to the device.
4
4 - 31