Graph Vertical Axis Scale Setting - Omron K6CM User Manual

7 Monitoring with K6CM and Motor condition monitoring Tool
7-3-5

Graph Vertical Axis Scale Setting

Click the
Make the settings on the following screen. The vertical axis scale can be set for each measurement
value of each K6CM.
No.
1 Auto or Fix select Button
2 Max./min. value column
*1. When the measurement value is the insulation resistance value, it is fixed from 0 to 1.000 MΩ.
*2. The "digit" represents the resolution. For example, if the resolution of the measurement value is in increments
of 1, the maximum value must be greater than the minimum value by 10 or more. If the resolution of the mea-
surement value is 0.1 increments, the maximum value must be at least 1.0 greater than the minimum value.
Version Information
With software tool version 1.2.0.0 or later, the vertical axis scale can be set.
In earlier versions, the vertical axis scale of the graph changes automatically.
7 - 12
Button on each graph display screen.
1
2
Name
Auto: The vertical axis scale of the graph changes automatically.
0 to 1.3 times (
ing/Critical)
Fix: The vertical axis scale of the graph is the value entered in the Max./min. value col-
umn.
When "Fix" is selected, enter the scale maximum value and minimum value.
The maximum value must be greater than 10 digits (
Description
*1
) of the larger of the measurement value or alarm value (Warn-
*2
K6CM Motor Condition Monitoring Device User's Manual (N219)
) than the minimum value.