Note If the download fails, "Failed to download." is displayed on the "Downloading to device" wizard
screen in the following [Start navigation] Dialog Box. After checking the connection, click the [OK]
Button, or click the [Back] Button and go back to one of the steps from step 4.
13
In the field of "Motor name that the target devices belong to", set the motor name to which the
target device belongs.
The initial value is MotorName.
Precautions for Correct Use
• It is not possible to register the same type of device in the same motor name.
• Up to 3 devices can be registered in the same motor name.
14
Click the [OK] Button.The following [Navigation complete] wizard screen is displayed.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Motor condition monitoring Tool
The IP address of the registered device is displayed.
4
4 - 35