Omron K6CM User Manual page 289

When the installation is completed, the device is added to the hardware list.
4
Registering devices
(1) Device registration to the network configuration
Register the EtherNet/IP devices which participate in the tag data links in the Network Con-
figuration Window.
From the hardware list, you can register a PLC as an originator device and K6CM devices,
by dragging and dropping each device at a time, or by selecting and double-clicking it.
As an example, register a CJ1W-EIP21 (Rev 3) in the "Communications Adapter" category
as an originator device and register a K6CM-CI2M as a target device.
Note Select the same model as the device you use and register it.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Drug
Appendices
A
A - 29