Omron K6CM User Manual page 292

Appendices
Additional Information
If you have created network symbols, tag set names and tag names in advance with the
CX-Programmer and have the exported file (.CSV), click [To/From File] at the lower right, select
[ Import from File...]. By doing so, you can omit the following "(1) -1 Tag editing" and "(1) -2 Edit-
ing tag set" below.
Click [Edit Tag (T) ...] in the Edit Device Parameters Dialog Box to edit tag sets.
To enter tags, there are tabs for Input (Consume) and Output (Produce), but set only the
Input (Consume) tab when connecting the K6CM series. Select the [In - Consume] Tab and
click [New (N) ...], the Edit Tags Dialog Box will be displayed.
Enter the tag name and its size (44 bytes), and click [Register (R)].
As a "tag name", enter the character string for the CPU Unit's I/O memory address or a net-
work symbol (e.g., 100, W100, D0, Input_signal).
Addresses in the following I/O memory areas can be set.
CIO Area
Holding Area
Work Area
DM Area
EM Area
Additional Information
Here, create a symbol that matches the name of the I/O memory address used in the PLC or
the name of the network symbol (input).
A - 32
CPU Unit's data area
Bank 0 hex
···
Bank 18 hex
K6CM Motor Condition Monitoring Device User's Manual (N219)
Address (Text to input in Name Field.)
0000~6143
H000~H511
W000~W511
D00000~D32767
E0_00000~E0_32767
···
E18_00000~E18_32767