Omron K6CM User Manual page 160

6 How to Use the Motor condition monitoring Tool
Device setting screen
Click the [Device setting] Button. The following device setting screen is displayed.
For details on the displayed parameters, refer to 6-2-1 Settings for Each Monitor Type of K6CM devices
on page 6-19.
 Device setting screen
Motor name
Device Type
Version Information
If the following connection processing is performed in software tool version 1.3.0.0 or later, the
Eip cpu version of the connected device is displayed on the right of the device type in the
parameter name list.
• Connecting to device of start navigation
• Start monitoring
• Max./min. reset of detailed data screen
• Downloading (PC → device) of the setting screen
• Uploading (device → PC) of the setting screen
• Device reset of setting screen
6 - 10
Monitoring/
Parameter name Monitoring stopped
K6CM Motor Condition Monitoring Device User's Manual (N219)
Value, unit
Switch between
[Monitoring by
motor category]
and [Monitoring
by monitoring
category]
Device reset button