Omron K6CM User Manual page 291

Additional Information
Tag set names and tag names can also be created in advance using the CX-Programmer.
When creating in advance, make them the same names as the tags to be created with the Net-
workConfiguratior. You can also use them as symbol variables of PLC by sharing them with
CX-Programmer by importing from or exporting to a file the tag set names and tag names of
PLC edited with Network Configurator.
For detailed settings, refer to the manual of the originator.
(1)-1 Tag Editing
Select the device (e.g., CJ1W-EIP21) for editing the tag set and the tag.
Then right-click it and select [Parameter (P)] | [Edit (E) ...] or double-click it.
Click the Tag Sets Tab at in the Edit Device Parameters Dialog Box.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Appendices
A
A - 31