5-2
Installation
This section describes the installation of the K6CM devices.
5-2-1
Precautions at installation
Refer to the Precautions for Safe Use on page 7.
5-2-2
Installing the K6CM Device
For installation of the K6CM device, it is possible to install it on the DIN rail or install it with screws on
the wall.
When installing on DIN Track
Screw the DIN Track in three or more places in a control cabinet.
Recommended DIN Track
PFP-M End plate (2 pieces)
Installation Direction
There is no particular restriction on the mounting direction of the K6CM device, but install it securely
in the horizontal or vertical direction as much as possible.
K6CM Motor Condition Monitoring Device User's Manual (N219)
5 Installation and Wiring
Model
Dimensions
PFP-100N
1,000 mm
PFP-50N
500 mm
5
Manufacturer
OMRON
5 - 5