Monitoring Completed - Omron K6CM User Manual

7 Monitoring with K6CM and Motor condition monitoring Tool
7-2-4

Monitoring Completed

When the trigger mode is "external trigger" or "internal trigger", when the termination condition of moni-
toring is satisfied, the measurement value of the numerical display LCD on the front of the K6CM is
retained. Also, the status at the end of monitoring is retained for the alarm bar and transistor outputs 1
and 2.
At this time, "MON" in the status display on the front of the K6CM goes out.
7 - 8
K6CM Motor Condition Monitoring Device User's Manual (N219)