Omron K6CM User Manual page 27

1-2 Features
1-2-1 Features Common for All Models
• Multiple K6CM devices can be connected to one PLC or one PC, and multiple motor statuses can be
monitored at one time.
• Status monitoring can be confirmed on site easily from the alarm bar display and numeric LCD dis-
play on the front of the K6CM device.
• Two levels of warning failure and critical failure are prepared as alarm monitoring levels. Two outputs
of the transistor are possible when the alarm occurs.
• A self-diagnosis function and replacement timing notification are incorporated. With these functions,
errors of the K6CM device and when to be replaced can be determined.
• Trigger functions using an external input or internal set value comparison enable monitoring only
when specified conditions such as startup of the motor are met. In addition, the maximum and mini-
mum values can be automatically calculated and output during the period that those conditions are
met. (*1)
• EtherNet/IP (i.e., tag data link, CIP message communications) is supported. Measurement values
and internal data can be read, and alarm setpoints and other set values can be written from the PLC
or PC. (*2)
*1. For the insulation resistance type K6CM device, the trigger function using the external input can be supported
for the Eip cpu version 1.10 or higher.
*2. Tag data link can be read only. Write not possible.
Features of Main CPU Version 1.2 or Later
• Measurement is possible in a stable state even after starting up the motor using the trigger function
following a monitoring delay time.
• Modbus TCP is supported. Measurement values and internal data can be read, and alarm setpoints
and other set values can be written from the PLC or PC by using message communications.
• The indication for the unit of measurement value (monitoring type) on the K6CM device numeric LCD
display can be switched automatically at a 5-second interval. This allows you to confirm status moni-
toring without touching the operation keys of the K6CM device.
K6CM Motor Condition Monitoring Device User's Manual (N219)
1 Overview
1
1 - 3