Omron K6CM User Manual page 250

9 Monitoring and Setting Using the Modbus TCP Devices
Parameter
Address
A011 hex Temperature
gap failure
warning
A012 hex Temperature
gap failure
critical
A013 hex Transistor
output
method
A014 hex Monitoring
delay time
A015 to Reserved
A017 hex area
*1. R: Read using Reading of multiple registers (03 hex).
W: Write using writing of multiple registers (10 hex).
 Insulation resistance type (K6CM-ISM)
Parameter
Address
A000 hex Display value
type
A001 hex Trigger mode
A002 hex Trigger type
A003 hex Trigger level
A004 hex Monitoring
time
A005 hex Alarm latch
9 - 16
name
Sets the temperature gap failure warning threshold.
0 to 9999 (unit: °C)
(0000 to 270F hex)
Sets the temperature gap failure critical threshold.
0 to 9999 (unit: °C)
(0000 to 270F hex)
Select transistor output method.
0: Normally Close
1: Normally Open
Set the delay time from the trigger input to the start
of measurement.
0.0 to 6000 (unit: 0.1 seconds)
(0000 to 1770 hex)
Reserved area
name
Sets which measurement value is displayed in the
7 segment display on the front of the K6CM device.
0: PV (Present value)
1: MIN
2: MAX
Selects the trigger mode.
0: Free run
1: External trigger
2: Internal trigger
Set the trigger measurement start condition. Set-
ting is not required when the trigger mode is "Free
run".
0: Rising edge
1: Falling edge
2: Level
For "Internal trigger", set the measurement value to
start trigger measurement. Setting is not required when
the trigger mode is "Free run" or "External trigger".
Note : Unit and decimal point position follow
measurement values. (Refer to A-6 Inter-
nal Data of K6CM Devices on page A-14.)
Sets the monitoring time.
1 to 6000 (unit: 0.1 seconds)
(0001 to 1770 hex)
Sets enable/disable of alarm latch function.
0: Disable (no latch)
1: Enable (with latch)
Description
Description
K6CM Motor Condition Monitoring Device User's Manual (N219)
Number Initial
*1
R/W
of bytes value
2 R/W 0050 hex
(80)
2 R/W 0050 hex
(80)
2 R/W 0000 hex
2 R/W 0000 hex
2 R/W 0000 hex
Number Initial
*1
R/W
of bytes value
2 R/W 0000 hex
2 R/W 0000 hex
2 R/W 0000 hex
2 R/W 0000 hex
2 R/W 0001 hex
(1)
2 R/W 0001 hex