6 How to Use the Motor condition monitoring Tool
6-2-5
Save Overwriting Project
To overwrite and save the project, do the following operations.
1
Click the
The following dialog box will be displayed.
Note To save as a name, click
2
Click the [OK] Button.
At this time, the log file is automatically saved with the project file.
6-2-6
Exit Project
To terminate the project, do the following. At this time, select whether to save the log file and project file.
1
Click the
The following dialog box will be displayed.
2
To save the log file and project file, click the [OK] Button.
If you do not want to save, click the [Cancel] Button.
3
Enter the directory and project name and click the [Save] Button.
The following dialog box will be displayed.
4
Click the [OK] Button.
The following dialog box will be displayed.
5
Click the [OK] Button.
The software tool ends.
6 - 26
[Save Project] Button on the menu tool button.
[Save the project as the specified name] of the menu tool button.
[Close] Button at the top right of the screen.
K6CM Motor Condition Monitoring Device User's Manual (N219)