Omron K6CM User Manual page 162

6 How to Use the Motor condition monitoring Tool
Monitoring Bar
Left end
• Left end
Buttons and tooltips
Back
Home
Device setting
• Center
• Right end
Buttons and tooltips
Start monitoring
Monitoring OFF
6 - 12
Center
You can return to the previous screen. However, it cannot be used on the monitoring screen.
Returns to the monitoring screen.
You will be transferred to the device setting screen.
For details of the device setting screen, see "Device setting screen" in 6-1-2 Monitoring Screen
and Setting Screen on page 6-5.
Display
Indicates that monitoring is stopped.
By pressing this button, monitoring will start.
It is currently being monitored.
By pushing this button, monitoring is stopped.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Outline of operation
Outline of operation
Indicates that monitoring is stopped.
The file name of the project is displayed on the left side
(the same applies below).
"Stopped" is displayed on the right side.
Indicates that monitoring is in progress, and that the entire
monitoring data is normal.
"Monitoring" is displayed on the right side.
It is currently being monitored and indicates that "Warning"
has occurred in one of the monitoring data.
"Monitoring" is displayed on the right side.
It is currently being monitored, and "Critical" has occurred
in one of the monitoring data.
"Monitoring" is displayed on the right side.
Enable / disabled condition
Right end