Omron K6CM User Manual page 296

Appendices
Select the K6CM series, and then click the middle
the connection in the tag data link.
Select the K6CM series displayed in the registered device list, click [New (N) ...] or dou-
ble-click the device, the Connection Allocation Dialog Box will be displayed.
The default values of each parameter are displayed, and then set the following items.
• Input tag set
Select the tag set name edited in "(1) -2. Editing tag set" from the drop down list and set it.
• Packet Interval (RPI)
From the setting range of K6CM (250 ms to 10000 ms), set the data send interval from
K6CM according to the system.
• Timeout Value
Select the timeout value at the occurrence of a communications error from the pull down
list and set it. The value can be set by multiple of packet interval (RPI). (4 times, 8 times,
16 times, ..., 512 times)
Additional Information
If detailed parameters (i.e., packet interval (RPI), timeout value) are not displayed, it can be dis-
played by clicking [Detail View].
A - 36
(Add device) Button to register
K6CM Motor Condition Monitoring Device User's Manual (N219)