Omron K6CM User Manual page 66

3 Measuring and monitoring System
 Example of Operation When the Trigger Mode Is "External trigger" or "Inter-
nal trigger"
Present value
Maximum value
Minimum value
3 - 12
Measurement value
A
B
C
Power ON Trigger start
(*1)
Measuring and
monitoring Not yet
"- - - -"
"- - - -"
"- - - -"
*1. In the above figure, the power-ON state and the unmeasured state (i.e., the state
until the measurement value is calculated) that exist immediately after turning ON
the power as shown on page 3-7 are omitted.
Maximum
value
Minimum
value
Power ON the next time
Measuring
and monitoring
During measuring
After measuring
and monitoring
and monitoring
Updated B
A
Updated
C
Updated Updated
K6CM Motor Condition Monitoring Device User's Manual (N219)
Time
Measuring and
monitoring Not yet
"- - - -"
"- - - -"
"- - - -"