Omron K6CM User Manual page 60

3 Measuring and monitoring System
Detailed information on trigger mode and behavior by status
The operation of the K6CM device and operation results from the software tool or message communi-
cations for each trigger mode and state are as follows.
Trigger
Status
mode
Free run Measuring and
monitoring Not yet
(immediately after
turning ON the
power)
While the power is
ON
External Measuring and
trigger Or monitoring Not yet
Internal trig-
During measuring
ger
and monitoring
After measuring
and monitoring
*1. The monitoring status can be confirmed in "Main body status" from message communications.
*2. The front LCD number can display either the present value, the minimum value, or the maximum value depending on the
setting.
3 - 6
Measuring and
Front Numeric LCD Dis-
monitoring sta-
*1
tus
No measuring and "- - - -" is displayed
monitoring
Measuring and Display measurement
monitoring *2
value ( )
No measuring and "- - - -" is displayed
monitoring
Measuring and Display measurement
monitoring *2
value ( )
No measuring and Holding and displaying
monitoring values at the end of moni-
toring
K6CM device Operation
Status dis-
play play
Not lit.
"MON"
Not lit.
"MON"
Not lit.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Value read by software tool or
message communications
The read value is 0
The present value, the minimum
value, and the maximum value of
the measurement value can be read
out individually
The read value is 0
The present value, the minimum
value, and the maximum value of
the measurement value can be read
out individually
The held values are read out at the
end of the measuring and monitor-
ing