A-11 Version Compatibility; A-11-1 Version Upgrades Of The K6Cm Series; A-11-2 Support Correspondence Between The K6Cm Device And Motor Condition Monitoring Tool - Omron K6CM User Manual

A-11 Version Compatibility

This section describes version upgrades of the K6CM series and the support status of Motor condition
monitoring Tool.
A-11-1 Version Upgrades of the K6CM Series
The following version upgrades have been performed up until now for the K6CM device.
Monitor Type
Comprehensive
current diagnosis
Vibration & tem-
perature
Insulation resis-
tance
*1. Released from Eip cpu version 1.2 as successor to the K6CM-CIM model.
A-11-2 Support Correspondence between the K6CM Device and Motor
Condition Monitoring Tool
The supported versions of the K6CM device and the Motor condition monitoring Tool are shown below.
Use a supported version combination.
K6CM device
Eip cpu version
1.2
1.1
1.0
K6CM Motor Condition Monitoring Device User's Manual (N219)
K6CM device
Eip cpu
Model
version
K6CM-CI2M*1 1.2
K6CM-CIM 1.1
1.0
K6CM-VBM 1.2
1.1
1.0
K6CM-ISM 1.2
1.1
1.0
CIP revision
(EDS)
Rev.3 Ver.1.3.0.0 or later
Rev.2 Ver.1.1.0.0 or later
Rev.1 Ver.1.0.0.2 or later
Additional functions
CIP revision
(EDS)
Rev.3 Degradation level 2 measure-
ment function
Monitoring delay time settings
Individual setting of moving aver-
age times
Display auto switching mode
Rev.2 Transistor output method settings
Rev.1 First release
Rev.3 Monitoring delay time settings
Display auto switching mode
Rev.2 Transistor output method settings
Rev.1 First release
Rev.3 Monitoring delay time settings
Display auto switching mode
Rev.2 Transistor output method settings
Rev.1 First release
Motor condition monitoring Tool
supported version
Appendices
A
A - 51