Passthroughs; Figure 182. Mapping Screen With Passthroughs - ADTRAN OPTI-6100 Installation Manual

Passthroughs

Passthrough menus operate a bit differently than cross-connects. The panes are not identical:
The left pane displays HS1 and the right pane displays HS2. No tributary modules are
displayed. To reduce the potential for confusion, both cursors move together in lockstep.
Passthroughs are labeled "Passthrough" in the Mapping screen for easy identification.
Figure 182 illustrates the Mapping screen with passthroughs.
TID: PHX-JMR
Unacknowledged Alarms:
/------- HS1 STS1 1 - Select VT -------\/------- HS2 STS1 1 - Select VT -------\
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5
| VT1.5 10 <> Passthrough
| VT1.5 11 -- Unmapped
| VT1.5 12 -- Unmapped
| VT1.5 13 -- Unmapped
| VT1.5 14 <> Passthrough
| VT1.5 15 <> MS3 STS1 1 VT 14
\--------------------------------------/\--------------------------------------/
61184500L1-5L
OPTI-6100 System
(West = HS1, East = HS2)
1 <> MS3 STS1 1 VT 1
2 <> Passthrough
3 <> Passthrough
4 <> MS3 STS1 1 VT 4
5 -- Unmapped
6 -- Unmapped
7 <> MS3 STS1 1 VT 7
8 -- Unmapped
9 -- Unmapped
'?' - Dual-Pane Menu Help Screen

Figure 182. Mapping Screen with Passthroughs

STS-12C Mapping
|| VT1.5 1 <> MS3 STS1 1 VT 1
|| VT1.5 2 <> Passthrough
|| VT1.5 3 <> Passthrough
|| VT1.5 4 <> MS3 STS1 1 VT 4
|| VT1.5 5 -- Unmapped
|| VT1.5 6 -- Unmapped
|| VT1.5 7 <> MS3 STS1 1 VT 7
|| VT1.5 8 -- Unmapped
|| VT1.5 9 -- Unmapped
|| VT1.5 10 <> Passthrough
|| VT1.5 11 -- Unmapped
|| VT1.5 12 -- Unmapped
|| VT1.5 13 -- Unmapped
|| VT1.5 14 <> Passthrough
|| VT1.5 15 <> MS3 STS1 1 VT 14
Mapping Cross-Connects
MM/DD/YY HH:MM
Chassis: 1 Slot: HS1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
349