Types Of Mappings; Table 167. Tributary Module Cross-Connects - ADTRAN OPTI-6100 Installation Manual

In Figure 172:
MS4 and MS6 are both mapped, but MS6 has a
♦
and MS4 is not.
MS10 is labeled
♦
selectable; select MS9 to map to both.
MS11 is in use as STS-1(s), VT1.5(s), or both, so it is not available for use as an STS-3c and
♦
is not selectable in this menu.
STS-3c #2 is marked
♦
OPTI-6100 (for line TX), but it is sending data to at least one other port.

Types of Mappings

Table 167 lists mapping types supported on the tributary modules.
Tributary Module
DS1 Modules
DS1M/DS1M2
DS1VM/DS1VM2
DS1VME
DS1VMT
DS3/EC1 and Transmux Modules
DS3EC1M
DS3EC1M3
DS3M3E
DS3M3T
TRAM
TRAM3
Ethernet Modules
ETHM/ETHM2
ETHM8/ETHM8-2
ETHM8E
ETHM8EF
ETHM8EH
ETHM8EW
ETHM8HF
61184500L1-5L
, which means MS9 and MS10 are a protected pair. MS10 is not
Protect
; it is not receiving data from anywhere else in the
broadcast

Table 167. Tributary Module Cross-Connects

VT1.5 STS-1
X
X
X
X
X
X
X
X
X
X
tag by it; MS6 is an Ethernet card
Port 2
STS-3c
X
X
1
X
1
X 1
X
X
X
X
X 1
X
1
X X
X X
X X
X X
X
X X
X
Mapping Cross-Connects
STS-12c Payload
DS3
VT1.5
VT1.5
VT1.5
DS3/STS
DS3/STS
DS3/STS
DS3/STS
VT1.5
VT1.5
GFP
GFP, PPP, X.86
GFP, PPP, X.86
GFP, PPP, X.86
GFP, X.86
X GFP, X.86
GFP, X.86
3
3
3
3
339