Auto Upgrade Status Menu; Figure 99. Auto Upgrade Status Menu - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Auto Upgrade Status Menu

Main\System Controller\Provisioning\System
Auto Upgrade Status
Use the Auto Upgrade Status menu
firmware for the SCM, and OMM and Tributary modules installed in the OPTI-6100 system.
TID: HSV00001
Unacknowledged Alarms:
1. Local File Cache Expire (Min)
2. Auto Upgrade Config Basepath
3. Auto Upgrade Config Filename
4. Auto Upgrade Mode
5. Config File Refresh Interval
6. Auto Upgrade Retries
System Release
Upgrades: 0/1, Errors: 0/0, Discovered: 9, Needed: 0, Active: 0
Shelf(
Slot (MS1, 00:00:00): Idle, 1184503L1 firmware is current (C04)
(F)irst Slot, (L)ast
(C)lear File Cache
(A)bort, (S)tart, (D)etails
For a practical application of Auto Upgrade, refer to the OPTI-6100 Maintenance and Trouble-
shooting Practice (P/N 61184500L1-6).
176
Administration\Auto Upgrade Status\
(Figure
OPTI-6100 System
Auto Upgrade Status
00:00:00): Error, config file not found
Selection :

Figure 99. Auto Upgrade Status Menu

99) to manually or automatically upgrade the flash
: 480 minutes
: OPTI6100_LATEST\
: 6100_LATEST.auc
: Auto
: 96 hours
: 5
: LATEST
(P)rev Slot, (N)ext
(R)eset Config File Cache
MM/DD/YY hh:mm
MX Chassis: 1
61184500L1-5L