Table 141. Ds1Vm2 Provisioning Options - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
Table 141 lists the minimum factory defaults and values that are loaded after installation and
self-test for the DS1VM2 module.
Provisioning Options
Equipment Provisioned State
AINS Time, Facility 1–28
AINS Timer, Facility 1–28
Loopback Timeout, Facility 1–28
Loopback Timer, Facility 1–28
Facility Provisioned State, DS1 1–28
DS1 Line Length, Facility 1–28
DS1 Line Coding, Facility 1–28
DS1 Loopback Detection, Facility 1–28
DS1 Line Identification, Line 1–28
DS1 Alarm Reporting, Facility 1–28
Mapping
PRI Clock Output to OMM
SEC Clock Output to OMM
270

Table 141. DS1VM2 Provisioning Options

Settings
♦ IS
OOS-MA
♦
1 Minute to 96 Hours; 4:00 is the default
Enabled
♦
Disabled (default)
♦
1 Minute to 96 Hours; 2:00 is the default
♦ Enabled
♦ Disabled (default)
IS
♦
OOS-MA
♦
0–133 Feet (default)
♦
♦ 133–266 Feet
266–399 Feet
♦
AMI
♦
B8ZS (default)
♦
Disabled (default)
♦
♦ CSU
NIU
♦
(enter text)
Enabled (default)
♦
♦ Disabled
GR-253 (default)
♦
♦ M13
♦ Disabled (default)
Facility 1
♦
♦ Facility 2
♦ Disabled (default)
♦ Facility 1
Facility 2
♦
♦ OOS-MA UAS (default)
OOS-MA UAS (default)
♦
399–533 Feet
♦
♦ 533–655 Feet
61184500L1-5L