Module Insertion; Figure 169. Oc-3/Oc-12 Tributary Module Insertion Diagram - ADTRAN OPTI-6100 Installation Manual

Module Insertion

NOTE
If present, remove the MS Module Blank(s) (P/N 1184505L1) from
the appropriate slot(s) of the OPTI-6100 chassis.
Install the OC-3/OC-12 tributary module according to

Figure 169. OC-3/OC-12 Tributary Module Insertion Diagram

NOTE
Route the fiber conductors along the chassis fiber tray.
61184500L1-5L
1. Open latch
2. Align module with
guide groove;
push firmly until
seated
Tributary Module Installation and Turn-Up
Figure 169.
3. Close latch
327