Ms Modules Menus; Figure 112. Ms Modules Menu (Mx Chassis) - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

MS Modules Menus

Main\MS Modules\
MS Modules
Use the MS Module Menus
NOTE
In the example below, the ETHM8 module installed to MS11 blocks
access to MS12. The MS12 slot indicates this by displaying
TID: PHX-JMR
Unacknowledged Alarms: None
Depending on the chassis, this screen displays a different number of MS slots, as follows:
MX Chassis: MS1 – MS12
♦
SMX Chassis: MS1 – MS4
♦
LMX Chassis: MS1 – MS24
♦
NOTE
In the MS Modules Menu for the LMX chassis, there is a slot listing
for the DS3 Swich Module slot. To access the DS3SM, enter a
196
(Figure 112) to enter the menu system for a tributary module.
OPTI-6100 System
MS Modules Menus
MS1 - DS3M3E...... [No Alarms]
MS2 - ............ [No Alarms]
MS3 - DS1M........ [No Alarms]
MS4 - ............ [No Alarms]
MS5 - O3TM........ [No Alarms]
MS6 - ............ [No Alarms]
MS7 - TRAM........ [No Alarms]
MS8 - TRAM........ [No Alarms]
MS9 - ............ [No Alarms]
MS10 - ............ [No Alarms]
MS11 - ETHM8....... [No Alarms]
MS12 - Slot 11..... [No Alarms]
Enter Module Slot Number:
Inverse=Busy Modules
'?' - System Help Screen

Figure 112. MS Modules Menu (MX Chassis)

.
Slot 11
MM/DD/YY HH:MM
MX Chassis: 1
.
W
61184500L1-5L