DCC Interface Menu — Create a New DCC Interface
Main\System Controller\Provisioning\Network Management\SONET SDCC Provisioning\Create a New DCC
[Select a Facility]
Use the DCC Interface menu
TID: HSV00001
Unacknowledged Alarms: None
(D)elete this DCC interface
NOTE
Parameters listed below Service State cannot be altered when the
DCC is IS. The DCC must be OOS to access the remaining
provisioning parameters or to delete the DCC.
61184500L1-5L
(Figure
61) to provision a new or existing DCC interface.
DCC Interface:
1.
Name
2.
Service State
3.
DCC Mode
4.
Window Size
5.
Response Timeout (msec)
6.
Link Inactivity Timeout
7.
Max Retransmissions
Max I-Frame Length
Information Trans. Serv. : Acknowledged
Link Status
Selection :
Figure 61. DCC Interface Menu for High Speed 1
OPTI-6100 System
High Speed 1
: High Speed 1
: Out Of Service
: User
: 7
: 2000
: 10
: 3
: 512
: UpAITS
OPTI-6100 Main Menu
Interface\[Select a Facility]\
MM/DD/YY hh:mm
MX Chassis:
1
(OOS-MA)
117