Module Insertion; Figure 165. Gige Module Insertion Diagram - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Module Insertion

NOTE
If present, remove the MS Module Blank(s) (P/N 1184505L1) from
the appropriate slot(s) of the OPTI-6100 chassis.
Install the GigE module according to
NOTE
Route the fiber conductors along the chassis fiber tray.
308
Figure
1. Open latch
2. Align module with

Figure 165. GigE Module Insertion Diagram

165.
3. Close latch
guide groove;
push firmly until
seated
61184500L1-5L