Network Ping Screen; Figure 50. Network Ping Screen; Table 39. Ping Utility Status Fields - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Network Ping Screen

Main\System Controller\Provisioning\Network Management\IP Network
Ping Utility
The Network Ping screen
verify the device in question is operational, and that a valid connection exists between that
device and the OPTI-6100.
NOTE
The Ping Utility is restricted to ADMIN and CONFIG privilege levels.
TID: PHX-JMR
Unacknowledged Alarms:
Table 39 lists the status fields on the Network Ping screen.
Field Description
Host This option displays the IP address of the device to which the ping is being transmitted.
Sent This option displays the number of pings transmitted.
Received This option displays the number of replies received.
Timeouts This option displays the number of timeouts that have occurred during transmission.
Status This option displays the current status of the Ping Utility.
Possible values are
102
(Figure 50) is used to transmit a "ping" to a designated IP address, to
OPTI-6100 System
Network Ping
Host : 0.0.0.0
Sent : 0
Received : 0
Timeouts : 0
Status : Idle
[H]-Set Host, [P]-Ping, [C]-Continuous(1/sec)
'?' - System Help Screen

Figure 50. Network Ping Screen

Table 39. Ping Utility Status Fields

(inactive) or
Idle
Provisioning\Ping Utility\
MX Chassis:
(active).
Pinging
MM/DD/YY HH:MM
1
61184500L1-5L