OPTI-6100 Installation and Turn-Up Practice
OSI Tunnel Interface Menu
Main\System Controller\Provisioning\Network Management\IP Network Provisioning\IP Network
OSI Tunnel Interface
Use the OSI Tunnel Interface menu
TID: PHX-JMR
Unacknowledged Alarms:
(S)end ARP
Table 31
lists the options in the OSI Tunnel Interface menu.
The Link status field at the bottom of the OSI Tunnel Interface menu indicates the current
status of the OSI Tunnel interface.
Option
Description
1
OSI Tunnel Interface
2
OSI Tunnel IP Address
3
OSI Tunnel Subnet Mask
4
OSI Tunnel Gateway
5
Use Ethernet IP Addr
92
(Figure
OPTI-6100 System
OSI Tunnel Interface
1.
OSI Tunnel Interface
2.
OSI Tunnel IP Address
3.
OSI Tunnel Subnet Mask : 255.255.255.255
4.
OSI Tunnel Gateway
5.
Use Ethernet IP Addr
Link
Selection :
'?' - System Help Screen
Figure 42. OSI Tunnel Interface Menu
Table 31. OSI Tunnel Interface Menu Options
Function
This option enables/disables the OSI Tunnel interface.
Select Enable or Disable (default).
This option sets the OSI Tunnel IP address.
This is unavailable if Use Ethernet IP Addr (below) is set to Yes.
This option sets the OSI Tunnel IP subnet mask.
This is unavailable if Use Ethernet IP Addr (below) is set to Yes.
This option sets the OSI Tunnel IP gateway.
This option specifies if the OSI Tunnel Interface should default to
the Ethernet Interface IP address.
Select Yes (default) or No.
If set to Yes, the IP address and Subnet Mask options (above)
cannot be selected or modified.
42) to configure the OSI Tunnel interface.
: ENABLE
: 10.25.40.1
: 0.0.0.0
: No
: Down
Interfaces\OSI Tunnel Interface\
MM/DD/YY HH:MM
MX Chassis:
1
61184500L1-5L