Module Insertion; Figure 158. Module Insertion Diagram - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Module Insertion

NOTE
If present, remove the MS Module Blank (P/N 1184505L1) from the
appropriate slot of the OPTI-6100 chassis.
Install a three-port Ethernet module according to
288
1. Open latch
2. Align module with
guide groove;
push firmly until
seated

Figure 158. Module Insertion Diagram

Figure 158.
3. Close latch
61184500L1-5L