Table 168. Omm Cross-Connects - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
Table 167. Tributary Module Cross-Connects (Continued)
Tributary Module
Gigabit Ethernet Modules
GECM
GEFM
GEFMEH
GEFMEW
GEMM
GESM
PWE3M
Optical Tributary Modules
O3TME
O3TMIR
O3TMLR
O3TMM
O12TME
1. When mapping an STS-1, this is equivalent of mapping 28 VT1.5s, in order; however, protection switching is
done at a STS level, not at a VT level.
2. VT1.5 cross-connects are only supported in the DROP direction (HS§MS 1way mapping). STS-1 and STS-3c
cross-connects are only supported in the ADD direction (MS§HS).
3. When in EC1 mode, the STS can carry any payload.
Table 168 lists the mapping types supported on the OMM modules.
OMM Type
OMM3: L1, L4, L9, L10
OMM3: L5, L6, L7
OMM12: L1, L4
OMM12: L2, L3, L5, L6, L7, L8
OMM48, OMM48L
OMM312V
OMMXCV
1. VT1.5 cross-connects are only supported to Ethernet cards for Low Order VCAT. An STS-1 is mapped to the
Ethernet card from the OMM.
2. STS-12c requires the OMM312V module to be equipped with OC-12 SFPs, and operating in OC-12 mode.
340
VT1.5 STS-1
X
X
X
X X
X
X
X X
X X
X
X 2
X
X
2
X
X 2
X X

Table 168. OMM Cross-Connects

VT1.5
X 1
X
X 1
X
X
X
X
STS-3c STS-12c
X
X X
X
X
X
X
X
X
X X
STS-1 STS-3c
X
X X
X X
X X
X X
X X
X X
Payload
GFP, PPP, X.86
EFM
GFP, X.86
GFP, X.86
GFP, PPP, X.86
GFP, PPP, X.86
VT1.5
any type
any type
any type
any type
any type
STS-12c Payload
any type
any type
any type
any type
X any type
any type
X 2
any type
61184500L1-5L