Table 55. Tl1 Menu Options - ADTRAN OPTI-6100 Installation Manual

Table 55 lists the options in the TL1 menu.
Option Description
N/A Chassis
1 Client Shelf Management
2 TID
3 TID/SysName Sync
4 TL1 Telnet Port
5 TL1 Raw-TCP Port
6 Exchange TL1 Ports
7 TL1 Echo
8 TL1 Command Message Log
9 TL1 Cut-Through
61184500L1-5L

Table 55. TL1 Menu Options

Function
This option displays the Chassis Number, which is indirectly
provisioned through a combination of other options:
"Interbank Comm. Mode Menu"
♦
♦ "Client Shelf Management Menu"
TID (below)
♦
The Chassis Number is forced to 1 if Interbank Comm. Mode
is set to Host.
Chassis Number must be unique if Interbank Comm. Mode is
set to Client, and Client Shelf Management is set to
Expansion Shelf (see TID, below).
This option displays the
page 124.
The TID (Target ID) is a 20-character code used to uniquely
identify a location. It is usually the Common Language
Location Identification (CLLI) code.
Some remote management systems require a specific address
and description for every system managed. Registration of the
TID and Chassis Number with the management system may
be required before it can manage the OPTI-6100. This is
recommended for any configuration in which multiple
chassis are daisy-chained through the RS-485 bus for
management through a Host SCM.
This option enables/disables TID/SysName Sync. If enabled,
the TID (above) is also used as the SNMP System Name.
The default is Disabled. Refer to
Enter a port number between 1024 and 65535.
The default is 2000.
Enter a port number between 1024 and 65535.
The default is 2001.
This option swaps the Telnet and Raw-TCP ports (above).
This option enables/disables TL1 Echo.
Select Enabled or Disabled (default).
This option displays the
This option provides TL1 access via Craft and Ethernet ports.
OPTI-6100 Main Menu
on page 81
on page 124
"Client Shelf Management Menu"
"SNMP Menu"
"TL1 Log Menu" on page 125.
on
on page 120.
123