Table 22. Admin Port Menu Options - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
Table 22 lists the options in the Admin Port menu.
Option Description
1 Craft & Admin Port
Baud Rate
2 Admin Port Communications
3 Use RTS/CTS
(Hardware Handshaking)
4 Terminate Session Upon
Carrier Loss
5 De-assert/Drop DTR
on Logout
80

Table 22. Admin Port Menu Options

Function
This option displays the Craft & Admin Port Baud Rate menu.
Select a baud rate from the following options:
9600 (default)
♦
♦ 19200
38400
♦
57600
♦
♦ 115200
This option sets the default session mode on the Admin port.
The available options are as follows:
MENUS (default)
♦
♦ TL1
Terminal Server
♦
This option enables/disables hardware handshaking.
Select Enable or Disable (default).
If enabled, this option auto-terminates menu sessions via the
front-panel craft port when the cable is disconnected.
Select Enable or Disable (default).
If enabled, this auto-terminates menu sessions when Data
Carrier Detect is lost.
Select Enable or Disable (default).
61184500L1-5L