Ds3/Ec1 Module Provisioning; Ds3Ec1M Provisioning - ADTRAN OPTI-6100 Installation Manual

Installation and turn-up practice
Hide thumbs Also See for OPTI-6100:
Table of Contents

Advertisement

OPTI-6100 Installation and Turn-Up Practice

DS3/EC1 Module Provisioning

Each DS3/EC1 module has its own Provisioning menu tree. This section highlights some of the
items in the DS3/EC1 menu trees, needed to provision a new module.
Topics in this section include:

"DS3EC1M Provisioning"

"DS3EC1M3 Provisioning"
"DS3M3E Provisioning"
"DS3M3T Provisioning"
"DS3 Framing"
on page 286
DS3EC1M Provisioning
Use this Provisioning procedure to provision the DS3EC1M module (P/N 1184503L1).
NOTE
DS3 is treated as a pass-through signal. Framing is not supported.
To provision the DS3EC1M module, complete the following steps:
1. From the OPTI-6100 Main menu, select
2. From the MS Modules menu, select the DS3EC1M module to provision, and press
3. From the DS3EC1M Line Card menu, select
4. From the Provisioning menu, select
5. From the Equipment Provisioned State menu, select
6. From the Provisioning menu, select
7. From the Facility Provisioned State menu, select
8. From the Provisioning menu, select
NOTE
AINS prevents alarms from being reported on facilities that are not
yet receiving a valid signal. Refer to
9. From the AINS Timer menu, select
10. From the Provisioning menu, select
11. On the AINS Time screen, enter the number of hours and minutes, and press
12. From the Provisioning menu, select
13. From the Board Operating Mode menu, select
14. From the Provisioning menu, select
15. From the Line Build Out menu, select
278
on page 278
on page 280
on page 282
on page 284
MS Modules
Equipment Provisioned State
Facility Provisioned State
AINS Timer
, and press
Enable
AINS Time
Board Operating Mode
Line Build Out
or
Short
, and press
E
NTER
, and press
Provisioning
, and press
and press
IS,
, and press
and press
IS,
E
NTER
, and press
.
E
NTER
"Auto In-Service"
on page 332.
.
E
NTER
, and press
.
E
NTER
, and press
or
, and press
DS3
EC1
, and press
E
NTER
, and press
Long
E
NTER
.
E
NTER
.
E
NTER
.
E
NTER
.
E
NTER
.
E
NTER
to place the facility IS.
.
E
NTER
.
E
NTER
.
E
NTER
.
.
61184500L1-5L
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents