Table 74. Radius Remote Authentication Configuration Menu Options - ADTRAN OPTI-6100 Installation Manual

Table 74 lists the options in the Radius Remote Authentication Configuration menu.

Table 74. Radius Remote Authentication Configuration Menu Options

Option Description
1 Primary RADIUS Server
Authentication Settings
2 Secondary RADIUS
Server Settings*
3 3rd RADIUS
Server Settings*
4 4th RADIUS
Server Settings*
5 Validate RADIUS
Server Connection
6 Enable RADIUS Remote
Authentication
7 Enable TL1 RADIUS Login
8 Account Level if
None Received
* = This menu is identical to the Primary RADIUS Server Authentication Settings menu.
61184500L1-5L
Function
This option displays the
Authentication Settings Menu"
This option displays the Secondary RADIUS Server
Authentication Settings menu.
This option displays the 3rd RADIUS Server Authentication
Settings menu.
This option displays the 4th RADIUS Server Authentication
Settings menu.
This option validates the RADIUS server(s) IP addresses.
This option enables/disables RADIUS Server Authentication.
RADIUS cannot be enabled until Validate RADIUS Server
Connection (above) is successful.
Select Yes (Enabled) or No (Disabled). The default is No.
This option enables/disables TL1 access to RADIUS.
Select Yes (Enabled) or No (Disabled). The default is Yes.
This option specifies the default access privilege level assigned
to a login if the RADIUS Server cannot successfully return the
Adtran-IAD-Telnet-Level attribute.
The valid options are as follows:
1. NONE – FAIL LOGIN
2. READ_ONLY (default)
3. READ_WRITE
4. TEST
5. CONFIG
6. ADMIN
For Adtran-IAD-Telnet-Level attribute values, refer to "RADIUS
Remote Authentication Configuration" in the OPTI-6100
Maintenance and Troubleshooting Practice (P/N 61184500L1-6).
OPTI-6100 Main Menu
"Primary RADIUS Server
on page 152.
151