Navigating The Dual-Pane Screen; Figure 172. Hs1 Sts3C Mapping Screen; Table 166. Mapping Icons - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
Figure 172 shows a typical STS-3C Mapping screen.
TID: PHX-JMR
Unacknowledged Alarms:
/------------ Select STS3C ------------\/------------ Select STS3C ------------\
| HS 1 STS3C 1 <> MS 4
| HS 1 STS3C 2 >> Unmapped, broadcast || HS
| HS 1 STS3C 3 <> MS 6 Port 2
| HS 1 STS3C 4 -- Unmapped
| MS 1
| MS 2
| MS 3
| MS 4
| MS 5
| MS 6 Port 2
| MS 7
| MS 8
| MS 9
| MS 10
| MS 11
\--------------------------------------/\--------------------------------------/

Navigating the Dual-Pane Screen

One pane is highlighted at all times, indicating that it is the active pane.
Each pane has one line highlighted, indicating which line is active. The cursor can be moved up
and down through the keyboard arrow keys. To change which pane is the active pane, use the
left and right arrow keys, or the space bar. To move the cursor up or down one line use the up
and down arrow keys, or the
of the list use the
H
OME
When the dual-pane Mapping screen first appears, MS12 is not shown, and can be found below
the bottom of the pane. The contents of the dual-pane screen are scrollable; MS12 is visible
when the active view is scrolled down past M11.
The fifth column of each pane is displays an icon that summarizes the meaning of that line.
Table 166 lists the mapping icons and their meanings.
Mapping Icon
338
OPTI-6100 System
>< Loopback
-- Unmapped
-- Unmapped
<> HS 1 STS3C 1
-- Unmapped
<> HS 1 STS3C 3
-- Unmapped
<< HS 1 STS3C 2
-- Unmapped
-- <Protect>
-- <In use as STS1/VT> || MS 11
'?' - Dual-Pane Menu Help Screen

Figure 172. HS1 STS3C Mapping Screen

and keys. To move the cursor all the way to the top or bottom
U D
and keys. The
E
ND

Table 166. Mapping Icons

Description
-- No mapping
<> Normal bi-directional mapping
<< or >> Unidirectional mapping
>< Loopback
HS1 STS3C Mapping
|| HS 1 STS3C 1 <> MS 4
1 STS3C 2 >> Unmapped, broadcast |
|| HS 1 STS3C 3 <> MS 6 Port 2
|| HS 1 STS3C 4 -- Unmapped
|| MS 1 >< Loopback
|| MS 2 -- Unmapped
|| MS 3 -- Unmapped
|| MS 4 <> HS 1 STS3C 1
|| MS 5 -- Unmapped
|| MS 6 Port 2 <> HS 1 STS3C 3
|| MS 7 -- Unmapped
|| MS 8 << HS 1 STS3C 2
|| MS 9 -- Unmapped
|| MS 10 -- <Protect>
-- <In use as STS1/VT> |
key selects the highlighted item.
E
NTER
MM/DD/YY HH:MM
Chassis: 1 Slot: HS1
|
|
|
|
|
|
|
|
|
|
|
|
|
61184500L1-5L