Remote Menu Access Screen; Figure 135. Remote Menu Access Screen; Table 125. Remote Menu Access Screen Hot Keys - ADTRAN OPTI-6100 Installation Manual

Remote Menu Access Screen

Main\Remote Menu Access\
Remote Menu Access
Use the Remote Menu Access screen
configured to communicate over DCC.
The Remote Menu Access screen lists all configured NEs in alphabetical number. Network
Elements that do not permit direct menu access from the OPTI-6100 are listed as "Other
Network Elements" for reference.
Refer to the OPTI-6100 Maintenance and Troubleshooting Practice (P/N 61184500L1-6) for
details on establishing DCC links.
TID: OPTIMX-1
Unacknowledged Alarms: None
Network Elements With Menu Access
1. OPTIMX-2
2. OPTIMX-3
3. OPTIMX-4
Table 125 describes the hot keys in the Remote Menu Access screen.

Table 125. Remote Menu Access Screen Hot Keys

Hot Key Description
Enter a number,
#
and press
TID_Entry
T
Mode
M
61184500L1-5L
(Figure
Remote Menu Access
Select Remote System:

Figure 135. Remote Menu Access Screen

Function
To access the menus on a listed OPTI-6100 NE, type the number of the
. Remote System, and press
E
NTER
Use this hot key to enter a new TID for the target NE, instead of the
number in the list on the screen.
If more nodes exist in the topology than can be displayed on a single
screen, this method is faster than scrolling through multiple screens to
find the assigned number.
This hot key toggles the display to Neighbors Only mode, and back. Refer
to "Remote Menu Access Screen — Neighbors Only Mode"
135) to connect to other NEs that have been
OPTI-6100 System
Other Network Elements
FUJITSU
(T)id_entry
.
E
NTER
OPTI-6100 Main Menu
MM/DD/YY hh:mm
MX Chassis: 1
(M)ode
on page 222.
221