Interbank Comm. Mode Menu; Figure 34. Interbank Comm. Mode Menu; Table 23. Interbank Comm. Mode Menu Options - ADTRAN OPTI-6100 Installation Manual

Interbank Comm. Mode Menu

Main\System Controller\Provisioning\General\Management
Interbank Comm. Mode
Use the Interbank Comm. Mode menu
Host unit in a daisy-chained configuration.
TID: PHX-JMR
Unacknowledged Alarms:
Table 23 lists the options in the Interbank Comm. Mode menu.
Option Description
1 HOST
2 CLIENT
NOTE
If the OPTI-6100 is installed as a standalone unit, not connected to
any other OPTI-6100 chassis through the RS-485 bus, Interbank
Comm. Mode can be set to either Host or Client.
61184500L1-5L
Ports\Interbank Comm. Mode\
(Figure
OPTI-6100 System
Interbank Comm. Mode : CLIENT
1. HOST
2. CLIENT
Selection :
'?' - System Help Screen

Figure 34. Interbank Comm. Mode Menu

Table 23. Interbank Comm. Mode Menu Options

Function
This option sets the OPTI-6100 as the Host of an RS-485 management
daisy chain.
When assembling an RS-485 management daisy chain, one SCM must
be designated as Host, and all others must be designated as Clients.
The Host must be at an end of the daisy chain. It does not matter which
end has the Host SCM, but ADTRAN recommends that the Host SCM be
the first in the chain.
This option sets the OPTI-6100 as a Client in an RS-485 management
daisy chain. This is the default.
34) to designate the OPTI-6100 as a Client or
OPTI-6100 Main Menu
MM/DD/YY HH:MM
MX Chassis: 1
81