Table 138. Ds1Vm Provisioning Options - ADTRAN OPTI-6100 Installation Manual

Table 138 lists the minimum factory defaults and values that are loaded after installation and
self-test for the DS1VM module.
Provisioning Options
Equipment Provisioned State
AINS Time, Facility 1–28
AINS Timer, Facility 1–28
Loopback Timeout, Facility 1–28
Loopback Timer, Facility 1–28
Facility Provisioned State, DS1 1–28
DS1 Line Length, Facility 1–28
DS1 Line Coding, Facility 1–28
DS1 Loopback Detection, Facility 1–28
DS1 Line Identification, Line 1–28
DS1 Alarm Reporting, Facility 1–28
Mapping
PRI Clock Output to OMM
SEC Clock Output to OMM
61184500L1-5L

Table 138. DS1VM Provisioning Options

Settings
♦ IS
OOS-MA
♦
1 Minute to 96 Hours; 4:00 is the default
Enabled
♦
Disabled (default)
♦
1 Minute to 96 Hours; 2:00 is the default
♦ Enabled
♦ Disabled (default)
IS
♦
OOS-MA
♦
0–133 Feet (default)
♦
♦ 134–266 Feet
267–399 Feet
♦
AMI
♦
B8ZS (default)
♦
Disabled (default)
♦
♦ CSU
NIU
♦
(enter text)
Enabled (default)
♦
♦ Disabled
GR-253 (default)
♦
♦ M13
♦ Disabled (default)
Facility 1
♦
♦ Facility 2
♦ Disabled (default)
♦ Facility 1
Facility 2
♦
Tributary Module Installation and Turn-Up
♦ OOS-MA UAS (default)
OOS-MA UAS (default)
♦
400–533 Feet
♦
♦ 534–655 Feet
261