Module Insertion
NOTE
If present, remove the HS Module Blank (P/N 1184506L1) from the
appropriate slot of the MX or SMX chassis, or the LMX OMM Blank
Panel (P/N 1184563G2) from the LMX chassis.
Install the OMM48 module into the MX or SMX chassis according to
OMM48L into the LMX chassis according to
1. Open latch
2. Align module with
Figure 143. OMM48 and OMM48L Module Insertion Diagrams
NOTE
Route the fiber conductors along the MX/SMX chassis fiber tray or
the LMX chassis fiber management channel.
61184500L1-5L
3. Close latch
guide groove;
push firmly until
seated
Figure
143, right.
1. Open
latches
OMM Module Installation and Turn-Up
Figure
143, left. Insert the
3. Close
latches
2. Align module with
guide grooves;
push firmly until
seated
237