Get Provs From Hs (Mnps) Menu; Figure 62. Get Provs From Hs (Mnps) Menu - ADTRAN OPTI-6100 Installation Manual

Get Provs From HS (MNPS) Menu

Main\System Controller\Provisioning\Network
Get Provs From HS (MNPS)
Use the Get Provs From HS (MNPS) menu
Provisioning Storage). MNPS automatically stores SCM provisioning on the OMM modules. If
the SCM is replaced, the stored provisioning is automatically loaded to the new SCM.
Refer to "Appendix B, MNPS Items"
TID: HSV00001
Unacknowledged Alarms: None
NOTE
MNPS can also be enabled/disabled via SNMP. The OID for MNPS is
adTAeSCURestoreNetProvFromMUX
61184500L1-5L
Management\Get Provs From HS (MNPS)\
for a list of provisioning items stored in MNPS.
OPTI-6100 System
Get Provs From HS (MNPS) : ENABLE
1. ENABLE
2. DISABLE
Selection :
'?' - System Help Screen

Figure 62. Get Provs From HS (MNPS) Menu

(Figure 62) to enable/disable MNPS (MUX Network
, in the ADTRAN-TAeSCU-MIB.
OPTI-6100 Main Menu
MM/DD/YY hh:mm
MX Chassis: 1
119