Command Reference For Signaling Screens - Agilent Technologies N9360A Programming Manual
Multi ue tester
Hide thumbs
Also See for N9360A:
- Programming manual (352 pages) ,
- Installation manual (46 pages) ,
- Quick reference manual (44 pages)
Table of Contents
Advertisement
5
Programming Command Reference
Command Reference for Signaling Screens
These commands are used to set the controls and parameters
associated with an initial test condition.
Location Update
TESTs:MANual:LOCupdate
This command is valid when CDMA mode is set to MC1X. This
executes a Location update procedure to the mobile phone from
the Tester.
BS Call
TESTs:MANual:BSCall
This command executes a call setup to the mobile phone from
the Tester.
BS Release
TESTs:MANual:BSRelease
This command is valid when CDMA mode is set to MC1X. This
releases the call from the Tester.
UATI Assignment
TESTs:MANual:UATIassignment
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
executes the UATI Assignment to the mobile phone from the
Tester.
N9360A Multi UE Tester CDMA2000 Programming Manual
5-117
Advertisement
Table of Contents
