Agilent Technologies N9360A Programming Manual page 68

5
Programming Command Reference
5-18
HDD Clear File
UPDAte:HDD:CLEar:FILE
This command carries out deletion of the archive files for the
HDD update. It is effective only when the Update Type is set to
HDD.
Server IP Address
UPDAte:SERver:IPaddress <string>
UPDAte:SERver:Ipaddress?
This command sets the IP address of ftp server for SERVER
update. <string> specifies the IP address, ranging from 0.0.0.0 to
223.255.255.255. At preset, this is set to 0.0.0.0.
This query command returns the IP address of ftp server for
SERVER update. The range of this values is same as that of the
command parameter.
Server Reload List
UPDAte:SERver:RELOad:LIST
This command updates the list of the archive files in ftp server
for SERVER update. Please execute this command, when the
archive file for update is replaced on the ftp server. This
command is effective only when the update system is set to
SERVER.
Update Firmware
UPDAte:FIRMware:TRIGger MENU|FUNC|G00|W00|SYS
This command updates specified firmware specifed. MENU is
the top menu, FUNC is the Function Tester, G00 is the GSM
Tester, W00 is the W-CDMA Tester, SYS is system of tester.
N9360A Multi UE Tester CDMA2000 Programming Manual