Agilent Technologies N9360A Programming Manual page 3

Preface
Notation
Notices
Trademarks
N9360A Multi UE Tester CDMA2000 Programming Manual
Thank-you for purchasing the cdma2000 Option software for the Agilent
N9360A Multi UE Tester.
This product is a hardware and software for the Agilent N9360A Multi UE
Tester.
• Before using the tester, the user is advised to read this manual
carefully to ensure correct usage and also to fully utilize the tester
capability.
• This manual is a reference document and the user is advised to keep it
carefully for future reference.
• The manual describes the remote control commands of the Agilent
N9360A Multi UE Tester CDMA2000.
• Refer to the Agilent N9360A Installation Guide about the Tester setup
and to the Agilent N9360A CDMA2000 User Manual about the
operation method with the Agilent N9360A Multi UE Tester
CDMA2000 test capability.
The following notations are used in this manual:
• [Example] : indicates a screen name;
• Tester/tester : indicates the Agilent N9360A Multi UE Tester.
Please note that the screens of the user interface (UI) and values on the
screen used in this manual can be different from the actual screens.
• The information contained in this manual is subjected to change with
notice.
• No part of this manual may be reproduced either mechanically,
electronically or otherwise, without permission from Agilent
Technologies, Inc.
• Ethernet is the registered trademark of the Xerox Corporation.
• Microsoft, Windows and Visual Basic are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
• cdma2000 is a registered trademark of the telecommunications
Industry Association (TIA-USA).
• Other product names and companies used herein are trademarks or
registered trademarks of their respective companies or Agilent
Technologies, Inc. For registered trademarks, the trademarks symbols
® and ™ are omitted in this manual.
1
iii